The ring a brush will never shift Hard water, limescale, rust marks Soak it two minutes before you start Does not scratch glazed porcelain 100% natural pumice, no chemicals Toilet, tub, tiles, hob, grill
100% natural pumice stone, non-toxic and odourless

Anella Pumice Toilet Stone

Stone + handle
$30.00
Skip to product information
100% natural pumice stone, non-toxic and odourless

Anella Pumice Toilet Stone

$30.00

That ring is not dirt. It is mineral, baked onto the glaze by hard water, which is why the brush polishes it and the bleach whitens everything around it and leaves it exactly where it was.

  • Takes off hard water rings a brush only polishes
  • Soak it two minutes first — then it will not scratch the glaze
  • 10.5" assembled, so your hand stays out of the bowl
  • 100% natural pumice — no chemicals, no fumes
FormatStone + handle
10.5"Stone and handle
100% pumiceNo chemicals
Reusable handleThe stone is the consumable
How to use it keyboard_arrow_down
diamond_shine diamond_shine

Soak the stone in water for about two minutes before you start. Keep the surface wet the whole time, work in short strokes with light pressure, and let the stone do the cutting rather than leaning on it.

Rinse the bowl when you are done. Never use it dry — a dry stone drags, and dragging is what marks a surface.

Will it scratch? keyboard_arrow_down
diamond_shine diamond_shine

Not glazed porcelain, if it is wet. Pumice is softer than the glaze and harder than the scale sitting on top of it, which is the whole reason it works where a scouring pad would be a bad idea.

If you are nervous, test a patch under the rim first. The two rules are: soak it, and keep it wet.

Where not to use it keyboard_arrow_down
diamond_shine diamond_shine

Not on acrylic or fibreglass baths and shower trays, not on glass, chrome, stainless steel, painted or matte finishes, and not on non-stick pans. Those are all softer than the stone.

Glazed porcelain, ceramic tile, cast iron grates and enamel are what it is for.

Why the stone gets smaller keyboard_arrow_down
diamond_shine diamond_shine

Because it is being used. Pumice works by giving up its own surface as it cuts, so a stone that never wears down is a stone that is not doing anything.

The handle is the part you keep. It clips off and takes the next stone.

The porous pumice surface up close
Why a brush never worked

A brush pushes. Pumice cuts.

A toilet brush is nylon bristles on a stick. Against mineral scale that has bonded to glazed porcelain it does nothing except move water around and polish the stain.

Pumice is volcanic rock full of holes. It is harder than limescale and softer than the glaze, so it abrades one and leaves the other alone.

  • Harder than the scale Limescale and rust are mineral deposits. They come off by abrasion, not by chemistry — which is why bleach whitens the whole bowl and leaves the ring untouched.
  • Softer than the glaze That gap is the entire reason this is safe on porcelain when a scouring pad or a wire pad is not.
  • Soak it first Two minutes in water. Wet pumice glides and gives up its own surface as it cuts; dry pumice drags. Skipping this is how people mark things.
Sink, hob, bath, barbecue grill, tiles and toilet
Everywhere else it works

It is not only the toilet

Anywhere hard water leaves a line or heat bakes something on, the same stone handles it. Several of the people who swear by these never take theirs into the bathroom at all.

  • Bath, sink and tiles The same mineral line, the same fix. Check what your bath is made of first — this is for enamel and ceramic, not acrylic.
  • The hob and the oven racks Baked-on grease that soap does not touch. Burner tops, grates, racks — a whole hob in about ten minutes.
  • The barbecue grill Cold grill, wet stone, straight down the bars. It takes off carbon that a wire brush just polishes.
Nothing rounded up

The stone in numbers

10.5" stone and handle Hand stays out of the bowl
100% natural pumice No chemicals, no fumes
2 min soak before you start So it will not scratch
Honestly compared

Against a brush and a bottle of bleach

Bleach is a disinfectant, not a descaler. A brush is for what has not dried on yet. Neither of them was ever going to move a mineral ring.

Feature AnellaPumice Stone Toiletbrush Bleachor cleaner
Removes hard water rings
Removes limescale and rust marks
Safe on glazed porcelain
No fumes, nothing to store out of reach
Works on the hob and the grill too
Nothing to buy again next month
531 reviews · 4.8 Anellage

What buyers actually say

★★★★★

Six years of that ring. Ten minutes of scrubbing and it is gone. Mostly I am annoyed I did not try this sooner.

Melissa R.Verified buyer
★★★★★

We are on well water, so the bowl was permanently orange. It is white again.

Tricia N.Verified buyer
★★★★★

It is not effortless — you do have to scrub. But it actually works, which the brush never did.

Yvonne C.Verified buyer
★★★★★

Soak it first. I did not the first time and I could hear it dragging. Wet, it glides.

Karen B.Verified buyer
★★★★★

I bought it for the toilet and I use it more on the hob. The burner grates came up like new.

Sandra P.Verified buyer
★★★★★

No scratches on the porcelain at all. I went over it with a torch afterwards because I was nervous.

Denise A.Verified buyer
Nothing here is an accident

Every detail has a reason

Why pumice and not a scouring pad

A scouring pad is harder than the glaze it is sitting on, which is why it leaves a dull haze you cannot undo. Pumice sits in the gap between the scale and the porcelain, so it removes one and leaves the other.

Why you soak it

Water is what turns a rough stone into something that glides. It also lets the stone crumble slightly as it works, constantly exposing fresh surface instead of polishing itself smooth.

Why there is a handle

Ten and a half inches assembled means you reach under the rim and around the trap without putting your hand in the bowl. There is a hole in the end so it hangs and dries.

Why the stone wears down

That is the mechanism, not a defect. The abrasive is consumed doing the work — and the handle clips off and takes the next one.

Before you order

Frequently asked questions

Will it scratch my toilet?

Not glazed porcelain, provided the stone is wet. Pumice is softer than the glaze and harder than the scale on it.

Soak it two minutes, keep the surface wet while you work, and test a patch under the rim first if you would rather be sure.

Do I really have to soak it?

Yes. It is the one instruction that matters. A dry stone drags across the surface; a soaked one glides and crumbles slightly as it cuts.

What will it not remove?

Actual dirt and organic staining still want a cleaner. This is for mineral: hard water rings, limescale, rust marks and baked-on carbon.

Where should I not use it?

Acrylic and fibreglass baths and shower trays, glass, chrome, stainless steel, painted or matte finishes, and non-stick pans. All of those are softer than the stone.

How hard do I have to scrub?

Harder than you would like. A bad ring is a genuine ten minutes of work, and that is worth knowing before you order. It is one ten-minute job rather than a stain you look at every day.

Why is the stone getting smaller?

Because it is working. Pumice gives up its own surface as it cuts — that is what keeps it abrasive instead of polishing itself smooth.

Can I use it on the hob and the barbecue?

Yes, on cast iron grates, burner tops, oven racks and grill bars. Cold surface, wet stone. Not on non-stick or on anything enamelled in a colour.

Is it safe to have around kids and pets?

It is a piece of volcanic rock on a plastic handle. No chemicals, no fumes, nothing to keep on a high shelf.